4 tracks Mixer - Mx4v2s

• Connect a "custom-made" remote
• Connect a DEVA 4 tracks Hard-Drive recorder

The remote must be connected to the "Remote/Télécommande" socket. Wiring as follow:

Resistors: 10K Ohms / 1% / Metal Film (MRS25 or equivalent)
Potentiometers: 10K Ohms / "Log" / Audio quality (P&G, Alps, Bourns, ...)
Note: Only for mixers version 2, 3 and 3.10

The DEVA recorder must be connected to the "Mixer" socket. The connecting cable must comply with the following table:

Mx4v2s Mixer			DEVA Recorder (DB25M)
	Pin 1 Pin 7 Pin 7	Out track 1 Ground Ground (*)	Pin 13 Pin 25 Pin 12	Ch1 In+ Ch1 In- Shield
	Pin 2 Pin 7 Pin 7	Out track 2 Ground Ground (*)	Pin 24 Pin 11 Pin 23	Ch2 In+ Ch2 In- Shield
	Pin 3 Pin 7 Pin 7	Out track 3 Ground Ground (*)	Pin 10 Pin 22 Pin 9	Ch3 In+ Ch3 In- Shield
	Pin 4 Pin 7 Pin 7	Out track 4 Ground Ground = (*)	Pin 21 Pin 8 Pin 20	Ch4 In+ Ch4 In- Shield

Please check the user notice of the DEVA for further information concerning recording levels.
(*) In case the mixer and the DEVA are connected to the same power supply unit, please do not connect the shields. (see the "Connexions" section ).
Note: Only for mixers version 2, 3 and 3.10